Featured
Replacing Voltage Regulator On Mercury Outboard
Replacing Voltage Regulator On Mercury Outboard. Now, readjust all the screws in their position and tighten them securely. If that is the case, you have to replace the rectifier.

Chart a shows voltage and current reading of a standard rectifier. They charge your vessel's battery (s). Cdi’s regulated rectifiers is a direct replacement for johnson/ evinrude and applicable to many mercury marine outboard engines.
The Voltage Regulator Is Strictly Used To Regulate The Voltage Of The Outboard.
Fluctuation in voltage can harm these electrical mechanisms. It was just that the original voltage regulators were no longer being made. If you see higher reading than the mentioned rate, it means the battery is overcharging.
It Would Be Very Difficult To Replace The Voltage Regulator With The Boat In The Water And Since I Don't Own A Trailer I Decided To Replace It When The Boat Was Pulled For The Season.
There is a regulator which appears to be internal to the alternator. Chart b shows the more stable voltage and current reading on a. Although the batteries are different brands, they are approximately the same age.
Wiring Diagram Includes Several Detailed Illustrations That Display The Relationship Of Assorted Products.
We have the mercury voltage regulator 8893071t1 and many more outboard motor parts. Mercury does not make the voltage regulators, they outsource everything. Most mercury outboard stators perform two important functions.
Merc Suggests The First Thing You Should Check If Voltage At Battery Appears Low And Connections To Battery Are Known To Be Good Is To Connect A Digital Volt Meter Between The Alternator’s Output Stud And A Ground On The Alternator.
Your outboard stator is the powerhouse of your outboards ignition system. Now, readjust all the screws in their position and tighten them securely. I was told by a mechanic at a local marine dealer that i needed to replace both the rectifier and the voltage regulator.
Adding Voltage Regulator To An Unregulated Outboard If You Or A Friend Are Slightly Electronically Inclined, You Could Put A Small Voltage Regulator Together For Less Than $15.
So, all you're lacking is the voltage regulator. My dealer quoted $192.33 for the voltage regulator, quicksilver part. Wholesale marine has an extensive inventory of engine parts and battery parts including the mercury outboard voltage regulator.
Comments
Post a Comment